COUNCIL OFBrussels, 13 February 2008
THE EUROPEAN UNION
5243/08
Interinstitutional File:
2007/0002 (COD)
STATIS 7 ENER 10 COMPET 10 CODEC 29
"I" ITEM NOTE
from:
General Secretariat
to : Permanent Representatives Committee (Part 1)
No. Cion prop.: 5474/07 STATIS 7 ENER 27 COMPET 13 CODEC 60
Subject: Proposal for a Regulation of the European Parliament and of the Council on Energy Statistics
-
-Approval of the final compromise text
-
1.On 15 January 2007, the Commission forwarded to the Council and to the European
Parliament the above-mentioned proposal, which is based on Article 285(1) of the EC Treaty.
-
4.As a result of informal contacts between the Presidency, the Rapporteur of the European
Parliament and the Commission representatives, the text as set out in the Annex to this
document has been tentatively approved with a view to reaching an agreement at first reading.
5.
The Permanent Representatives Committee is therefore invited to:
-
-confirm the agreement reached by the Working Party on the text set out in the
Annex;
-
-give the Presidency a mandate to inform the Chairman of the European
Parliament's Committee on Research, Industry and Energy, by letter that, should
the European Parliament adopt the amendments to the Commission proposal as
set out in the Annex, the Council would adopt the proposal thus amended1 in order
to reach agreement at first reading.
ANNEX
REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
on energy statistics
(Text with EEA relevance)
THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 285(1)
thereof,
Having regard to the proposal from the Commission2,
Acting in accordance with the procedure laid down in Article 251 of the Treaty3,
Whereas:
(1) The Community needs to have precise and timely data on energy quantities, their forms,
sources, generation, supply, transformation and consumption, for the purpose of monitoring
the impact and consequences of its policy work on energy.
(2) Availability of accurate and up-to-date information on energy is essential for assessing the
impact of energy consumption on the environment, in particular in relation to the emission of
greenhouse gasses; this information is required by the Decision No 280/2004/EC of the
European Parliament and of the Council of 11 February 2004 concerning a mechanism for
monitoring Community greenhouse gas emissions and for implementing the Kyoto Protocol4.
(3) Directive 2001/77/EC of the European Parliament and of the Council of 27 September 2001
on the promotion of electricity produced from renewable energy sources in the internal
electricity market5 and Directive 2004/8/EC of the European Parliament and of the Council of
11 February 2004 on the promotion of cogeneration based on a useful heat demand in the
internal energy market and amending Directive 92/42/EEC6 require Member States to report
quantitative energy data. To follow the evolution towards these objectives, detailed and
uptodate energy data are required.
(3a) Directive 2002/91/EC of the European Parliament and of the Council of 16 December 2002
on the energy performance of buildings7, Directive 2006/32/EC of the European Parliament
and of the Council of 5 April 2006 on energy end-use efficiency and energy services8 and
Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005
establishing a framework for the setting of ecodesign requirements for energy-using products9
require Member States to report quantitative energy consumption data. To monitor progress
towards the achievement of the objectives set in these Directives, detailed and up-to-date
energy data, as well as a better interface between these energy data and related statistical
(4) The Green Papers COM(2005) 265 of the Commission of 22 June 2005 on Energy Efficiency
or Doing More With Less and COM(2006) 105 of 8 March 2006 on a European Strategy for
Sustainable, Competitive and Secure Energy lay down EU energy policies for which the
availability of EU energy statistics are required (among others, for the purpose of establishing
a European Energy Market Observatory).
(4a) The establishment of a public domain energy forecast model, as asked for by the European
Parliament in its Resolution of 14 December 2006 on a European Strategy for Sustainable,
Competitive and Secure Energy10 requires detailed and up-to-date energy data.
(4b) In the coming years, greater attention should be paid to the security of supply of the most
important fuels and more timely and more accurate data at EU level is needed to anticipate
and coordinate EU solutions to possible supply crises.
(5)
The liberalisation of the energy market and its growing complexity makes it increasingly
difficult to obtain reliable and timely energy data in the absence, in particular, of a legal basis
concerning the provision of such data.
(6) In order for the energy statistics system to assist political decision-making by the European
Union and its Member States and promote public debate which includes citizens, it must
afford guarantees of comparability, transparency, flexibility and ability to evolve. Thus, in the
near future, statistics on nuclear energy should be incorporated and relevant data concerning
(7) The production of Community statistics is governed by the rules set out in Council Regulation
(EC) No 322/97 of 17 February 1997 on Community Statistics11.
(8) Since the objectives of this Regulation, namely establishing a common framework for the
production, transmission, evaluation and dissemination of comparable energy statistics in the
Community cannot be sufficiently achieved by the Member States and can therefore be better
achieved at Community level, the Community may adopt measures, in accordance with the
principle of subsidiarity as set out in Article 5 of the Treaty. In accordance with the principle
of proportionality, as set out in that Article, this Regulation does not go beyond what is
necessary to achieve those objectives.
(9) In the production and dissemination of Community statistics under this Regulation, the
national and Community statistical authorities will take account of the principles set out in the
European Statistics Code of Practice, which was adopted by the Statistical Programme
Committee on 24 February 2005 and attached to the Recommendation of the Commission on
the independence, integrity and accountability of the national and Community statistical
authorities12.
(10) The measures necessary for the implementation of this Regulation should be adopted in
accordance with Council Decision 1999/468/EC of 28 June 1999 laying down the procedures
for the exercise of implementing powers conferred on the Commission13.
(12) It is necessary to foresee that the Commission may grant exemptions or derogations to
Member States from those parts of the energy data collection that would lead to excessive
burden on respondents. The exemptions or derogations may be granted only upon justification
which indicates the present situation and the excessive burdens transparently. The period for
which they remain in force should be limited to the shortest time necessary.
(13) The measures provided for in this Regulation are in accordance with the opinion of the
Statistical Programme Committee (SPC), established by Council Decision 89/382/EEC
of 19 June 198914.
HAVE ADOPTED THIS REGULATION:
Article 1
Subject matter and scope
-
1.This Regulation establishes a common framework for the production, transmission, evaluation
and dissemination of comparable energy statistics in the Community.
-
2.This Regulation shall apply to statistical data concerning energy products and their aggregates
in the Community.
Article 2
(b) "production of statistics" means production of statistics as defined in the second indent
of Article 2 of Regulation (EC) No 322/97;
(c) "Community authority" means Community authority as defined in the fourth indent of Article
2 of Regulation (EC) No 322/97;
(d)
"energy products" mean combustible fuels, heat, renewable energy, electricity, or any other
physical form of energy;
(e) "aggregates" mean data aggregated at national level on treatment or use of energy products,
namely production, trade, stocks, transformation, consumption, and structural characteristics
of the energy system such as e.g. installed capacities for electricity generation or production
capacities for oil products;
(f) "quality of data" means the following aspects of statistical quality : relevance, accuracy,
timeliness and punctuality, accessibility and clarity, comparability, coherence and
completeness.
Article 3
Data sources
-
1.While applying the principles of reduced burden on respondents and on administrative
simplification, Member States shall compile data concerning energy products and their
(c) other statistical estimation procedures or other sources, including administrative
sources, such as regulators of the electricity and gas markets.
-
2.Member States shall lay down the detailed rules concerning the reporting of the data needed
for the national statistics as specified in Article 4 by undertakings and other sources.
-
3.The list of data sources may be modified in accordance with the procedure specified in
Article 9(2).
Article 4
Aggregates, energy products and applicable transmittal
frequency of national statistics
-
1.The national statistics to be reported shall be as set out in the Annexes. They shall be
transmitted with the following periodicities:
(a) annual, for the energy statistics in Annex B;
(b) monthly, for the energy statistics in Annex C;
(c) short-term monthly, for the energy statistics in Annex D.
Article 5
Transmission and dissemination
-
1.Member States shall transmit to the Commission (Eurostat) the national statistics referred to
in Article 4.
-
2.The arrangements for their transmission, including the applicable time-limits, derogations and
exemptions thereof, shall be as set out in the Annexes.
-
3.The arrangements for the transmission of the national statistics may be modified in
accordance with the procedure referred in Article 9(2).
-
4.At the duly justified request of a Member State, additional exemptions or derogations may be
granted by the Commission in accordance with the procedure referred to in Article 9(3), for
those parts of the national statistics for which the collection would lead to excessive burden
on respondents.
4a. The Commission (Eurostat) shall disseminate yearly energy statistics by 31 January of the
second year following the reported period.
Article 6
-
3.For the purpose of this Regulation, the following quality assessment dimensions shall apply to
the data to be transmitted:
(a) 'relevance' refers to the degree to which statistics meet current and potential needs of the
users;
(b) 'accuracy' refers to the closeness of estimates to the unknown true values;
(c) 'timeliness' refers to the time lag between the availability of the information and the
event or phenomenon it describes;
(d) 'punctuality' refers to the time lag between the date of the release of the data and the
target date when it should have been delivered;
(e) 'accessibility' and 'clarity' refer to the conditions and modalities by which users can
obtain, use and interpret data;
(f) 'comparability' refers to the measurement of the impact of differences in applied
statistical concepts and measurement tools and procedures when statistics are compared
between geographical areas, sectoral domains or over time;
(g) 'coherence' refers to the adequacy of the data to be reliably combined in different ways
-
4.Within 6 months following receipt of a request from the Commission (Eurostat), and in order
to allow it to assess the quality of the data transmitted, Member States shall transmit to the
Commission (Eurostat) a report containing any relevant information concerning the
implementation of this Regulation.
Article 7
Time reference and periodicity
Member States shall compile all data specified in this Regulation from the very beginning of the
calendar year following the adoption of this Regulation, and shall transmit them from there onwards
with the periodicities defined in accordance with in Article 4(1).
Article 7a
Annual nuclear statistics
The Commission (Eurostat) shall, in cooperation with the nuclear energy sector in the EU, define
a set of annual nuclear statistics which shall be reported and disseminated from 2009 onwards, that
year being the first reported period, without prejudice to confidentiality, where it is necessary, and
avoiding any duplication of data collection, as well as keeping production costs and reporting
burden low.
The set of annual nuclear statistics shall be established and may be modified in accordance with the
procedure specified in Article 9(2).
(a) reviewing the methodology used to generate renewable energy statistics in order to
make available additional, pertinent, detailed statistics on each renewable energy source,
annually and in a cost effective manner. The Commission (Eurostat) shall present and
disseminate the statistics generated from 2010 (reference year) onwards;
(b) reviewing and determining the methodology used at national and Community level to
generate final energy consumption statistics (sources, variables, quality, costs) based on the
current state of play, existing studies and feasibility pilot-studies, as well as cost-benefit
analysis yet to be conducted; and evaluating the findings of the pilot studies and cost benefit
analysis with the view to establishing breakdown keys for final energies by sector and main
energy uses and gradually integrating the resulting elements in the statistics from 2012
(reference year) onwards.
The set of renewable energy statistics may be modified in accordance with the procedure specified
in Article 9(2).
The set of final energy consumption statistics shall be established and may be modified in
accordance with the procedure specified in Article 9(2).
Article 8
Implementing measures
(c) modifications to the transmission arrangements (Article 5(3)).
-
2.The following measures necessary for implementation of this Regulation shall be laid down in
accordance with the procedure referred to in Article 9(3) :
(a) the granting of additional exemptions or derogations (Article 5(4)).
(b) The development and the updating of the methodological specifications (Article 6(3));
-
3.Consideration is to be given to the principle that the benefits of updating must outweigh its
costs, and to the principle that additional costs and burden remain within a reasonable limit.
Article 9
Committee
-
1.The Commission shall be assisted by the Statistical Programme Committee.
-
2.Where reference is made to this paragraph, the regulatory procedure with scrutiny laid down
in Article 5a of Decision 1999/468/EC shall apply.
-
3.Where reference is made to this paragraph, the regulatory procedure laid down in Articles 5
and 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8
Article 10
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the
Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, [...]
For the European Parliament For the Council
The President The President
ANNEX A
CLARIFICATIONS ON TERMINOLOGY
This annex supplies explanations or definitions of terms that are used in the other annexes.
-
1.GEOGRAPHICAL NOTES
For statistical reporting purposes only, the following geographical definitions apply:
· Australia excludes the overseas territories.
· Denmark excludes the Danish Faroes and Greenland.
· France includes Monaco and excludes the French overseas territories Guadeloupe, Martinique,
Guyane, Reunion, St.-Pierre and Miquelon, New Caledonia, French Polynesia, Wallis and
Futuna, Mayotte.
· Italy includes San Marino and the Vatican.
· Japan includes Okinawa.
· The Netherlands excludes Suriname and the Netherlands Antilles.
· Portugal includes the Açores and Madeira.
· Spain includes the Canary Islands.
· Switzerland does not include Liechtenstein.
· United States includes the 50 States, the District of Columbia, the U.S. Virgin Islands, Puerto
Autoproducers: enterprises, both privately or publicly owned, which generate electricity
and/or heat wholly or partly for their own use as an activity which supports their primary
activity.
Note : the Commission may further clarify terminology by adding relevant NACE references by
Comitology procedure after a revision of the NACE classification has entered into force.
2.1. Supply And Transformation Sector
Production/Indigenous Production
Quantities of fuels extracted or produced, calculated after any operation for removal of inert matter. Production includes the quantities consumed by the producer in the production process (e.g. for heating or operation of equipment and auxiliaries) as well as supplies to other producers of energy for transformation or other uses.
Indigenous means: production from resources within the concerned state.
Imports/Exports
For geographical definitions see "Geographical Notes" section.
Unless specified differently, "imports" refer to ultimate origin (the country in which the energy product was produced) for use in the country and "exports" to the ultimate country of consumption of the produced energy product.
Amounts are considered as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.
Where no origin or destination can be reported `Other' may be used.
Statistical differences may arise if only total import and export are available on the above basis, while the geographical breakdown is based on a different survey, source or concept. In this case, differences shall be included under `Other'.
International Marine Bunkers
Quantities of fuels delivered to ships of all flags that are engaged in international navigation. The international navigation may take place at sea, on inland lakes and waterways, and in coastal waters. Excluded is:
Stock Changes
The difference between the opening stock level and closing stock level for stocks held on national territory.
Gross Consumption (calculated)
Calculated value, defined as:
Indigenous production + From other sources + Imports - Exports - International marine bunkers + Stock changes
Gross Consumption (observed)
The quantity actually recorded in surveys of end-use sectors.
Statistical Differences
Calculated value, defined as:
Calculated gross consumption - observed gross consumption.
Includes changes in stocks at final consumers when this cannot be specified as part of the "Stock changes".
Reasons for any major differences should be stated.
Main Activity Producer Electricity Plants
Fuel quantities used to produce electricity.
Fuels used by plants containing at least one CHP unit are to be reported under Main Activity Producer CHP Plants.
Main Activity Producer Combined Heat and Power (CHP) Plants
Quantities of fuels used to produce electricity and heat.
Main Activity Producer Heat Plants
Quantities of fuels used to produce heat.
Autoproducer Heat Plants
Quantities of fuels that correspond to the quantity of heat sold.
Patent Fuel Plants:
Quantities used to produce fuels.
Quantities used for heating and operation of equipment should not be declared here, but declared as consumption in the Energy sector.
Coke Ovens:
Quantities used in coke ovens.
Quantities used for heating and operation of equipment should not be declared here, but declared as consumption in the Energy sector.
BKB/PB plants:
Quantities of lignite or brown coal used to produce brown coal briquettes (BKB) or of peat to produce peat briquettes (PB).
Quantities used for heating and operation of equipment should not be declared here, but declared as consumption in the Energy sector.
Gas Works
Quantities used to produce gas in gas works and coal gasification plants.
Quantities used as a fuel for heating and operation of equipment should not be included here, but declared as consumption in the Energy sector.
Petroleum refineries:
Quantities used to produce petroleum products.
Quantities used as a fuel for heating and operation of equipment should not be declared here, but declared as consumption in the Energy sector.
Not Elsewhere Specified Transformation
Quantities used for transformation activities not included elsewhere. If used, what is included under this heading should be explained in the report.
2.2. Energy Sector and Final Consumption
Total Energy Sector
Quantities consumed by the energy industry to support the extraction (mining, oil and gas production) or plant operations of transformation activities.
Excludes quantities of fuels transformed into another energy form (which should be reported under the Transformation sector) or used in support of the operation of oil, gas and coal slurry pipelines (which should be reported in the Transport Sector).
Includes the manufacture of chemical materials for atomic fission and fusion and the products of these processes.
Electricity, CHP and Heat Plants
Quantities consumed as energy at electricity plants, combined heat and power plants (CHP) and heat plants.
BKB/PB plants:
Quantities used as energy in BKP/PB plants.
Gas Works/gasification works
Quantities consumed as energy at gas works and coal gasification plants.
Blast Furnaces
Quantities consumed as energy at blast furnaces.
Coal Liquefaction
Quantities consumed as energy at coal liquefaction plants.
Petroleum Refineries
Quantities consumed as energy at petroleum refineries.
Oil and Gas extraction
Quantities consumed as fuel in the oil and gas extraction process and in natural gas processing plants.
Excludes pipeline losses (to be reported as Distribution losses) and energy quantities used to operate pipelines (to be reported in the Transport sector).
Total Final Consumption
Defined (calculated) as:
-
=Total non-energy use + Final Energy Consumption (Industry + Transport + Other sectors)
It excludes deliveries for transformation, use by the energy producing industries, and distribution losses.
2.3. Energy end-use Specification
Final Energy Consumption
Total energy consumption in industry, transport and other sectors.
Industry Sector
This refers to fuel quantities consumed by the industrial undertaking in support of its primary activities.
For heat only or CHP plants, only quantities of fuels consumed for the production of heat used by the plant itself are applicable. Quantities of fuels consumed for the production of heat that is sold, and for the production of electricity, should be reported under the appropriate Transformation sector.
Iron and Steel
Chemical (including Petrochemical) Chemical and petrochemical industries.
Non-Ferrous Metals
Non-ferrous metals industries.
Non-Metallic Minerals
Glass, ceramic, cement and other building materials industries.
Transport Equipment
Industries related to the equipment used for transport.
Machinery
Fabricated metal products, machinery and equipment other than transport equipment.
Mining and Quarrying
Excludes energy producing industries.
Food, Beverages and Tobacco
Pulp, Paper and Printing
Includes production of recorded media.
Wood and Wood Products (other than pulp and paper)
Transport Sector Rail
All consumption for use in rail traffic, including industrial railways.
Transport Sector - Domestic Navigation
Quantities delivered to vessels of all flags not engaged in international navigation (see International marine bunkers). The domestic/international split should be determined on the basis of port of departure and port of arrival and not by the flag or nationality of the ship.
Transport Sector Road
Quantities used in road vehicles.
Includes fuel used by agricultural vehicles on highways and lubricants for use in road vehicles.
Excludes energy used in stationary engines (see Other sector), for non-highway use in tractors (see Agriculture), military use in road vehicles (see Other sector - Not elsewhere specified), bitumen used in road surfacing and energy used in engines at construction sites (see Industry sub-sector Construction).
Transport Sector - Pipeline Transport
Quantities used as energy in the support and operation of pipelines transporting gases, liquids, slurries and other commodities.
Includes energy used for pump stations and maintenance of the pipeline.
Excludes energy used for the pipeline distribution of natural or manufactured gas, hot water or steam from the distributor to final users (to be reported in the energy sector), energy used for the final distribution of water to household, industrial, commercial and other users (to be included in the Commercial/Public sector) and losses occurring during this transport between distributor and final users (to be reported as distribution losses).
Transport Sector - International Aviation
Quantities of aviation fuels delivered to aircraft for international aviation. The domestic/international split should be determined on the basis of departure and landing locations and not by the nationality of the airline.
Excludes fuels used by airlines for their road vehicles (to be reported in the transport sector - Not elsewhere specified) and military use of aviation fuels (to be reported in the Other sectors Not elsewhere specified).
Transport Sector - Not Elsewhere Specified
Quantities used for transport activities not included elsewhere.
Include fuels used by airlines for their road vehicles and fuels used in the ports for ships unloaders, various types of cranes.
To be declared is what is included under this heading.
Other Sectors
Sectors not specifically mentioned or not belonging to energy, industry or transport.
Other Sectors - Commercial and Public Services
Fuels consumed by business and offices in the public and private sectors.
Other Sectors - Residential
To be declared are fuels consumed by all households including "households with employed persons".
Other Sectors - Agriculture/Forestry
Fuels consumed by users classified as agriculture, hunting and forestry.
Other Sectors - Fishing
Fuels delivered for inland, coastal and deep-sea fishing. Fishing should cover fuels delivered to ships of all flags that have refuelled in the country (include international fishing) and energy used in the fishing industry.
Other Sectors - Not Elsewhere Specified
These are activities not included elsewhere. This category includes military fuel use for all mobile and stationary consumption (e.g. ships, aircraft, road and energy used in living quarters), regardless of whether the fuel delivered is for the military of that country or for the military of another country. If used, what is included under this heading should be explained in the report.
-
3.OTHER TERMS
The meaning of the following abbreviations applies:
-
-TML: tetramethyl lead
-
-TEL: tetraethyl lead
-
-SBP: special boiling point
-
-LPG: Liquified petroleum gas
-
-NGL: Natural Gas Liquids
-
-LNG: Liquefied Natural Gas
ANNEX B
ANNUAL ENERGY STATISTICS
This annex describes the scope, units, reported period, frequency, deadline and transmission
modalities for the annual collection of energy statistics.
Annex A applies for explanations to terms, for which a specific explanation is not supplied in this
annex.
-
1.SOLID FOSSIL FUELS AND MANUFACTURED GASES
1.1. APPLICABLE ENERGY PRODUCTS
Unless otherwise specified this data collection applies to all of the following energy products:
Energy Definition
Product
1 Anthracite High rank coal used for industrial and residential applications. It has generally less than 10% volatile matter and a high carbon content (about 90% fixed carbon). Its gross calorific value is greater than 23 865 kJ/kg (5 700 kcal/kg) on an ash-free but moist basis.
2 Coking Coal Bituminous coal with a quality that allows the production of a coke suitable to support a blast furnace charge. Its gross calorific value is greater than 23 865 kJ/kg (5 700 kcal/kg) on an ash-free but moist basis.
3 Other Coal used for steam raising purposes and includes all bituminous coal that is not included under coking coal nor anthracite. It is characterized by higher volatile matter than anthracite (more than 10%) and lower carbon content (less than 90% fixed carbon). Its gross calorific value is greater than 23 865 kJ/kg (5 700 kcal/kg) on an ash-free but moist basis. If bituminous coal is used in coke ovens it should be reported as coking coal.
5 Lignite/Brown Non-agglomerating coal with a gross calorific value less than 17 435 kJ/kg (4 165 kcal/kg) and greater than 31% volatile matter on a dry mineral matter free basis.
Coal
Oil shale and tar sands produced and combusted directly should be reported in this category. Oil shale and tar sands used as inputs for other transformation processes should also be reported in this category.
This includes the portion of the oil shale or tar sands consumed in the transformation process. Shale oil and other products derived from liquefaction should be reported on the Annual Oil Questionnaire.
6 Peat A combustible soft, porous or compressed, sedimentary deposit of plant origin with high water content (up to 90% in the raw state), easily cut, of light to dark brown colour. Peat used for non-energy purposes is not included.
This definition is without prejudice to the definition of renewable energy sources as defined in Directive 2001/77/EC and to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories.
7 Patent Fuel A composition fuel manufactured from hard coal fines with the addition of a binding agent. The amount of patent fuel produced may, therefore, be slightly higher than the actual amount of coal consumed in the transformation process.
8 Coke Oven The solid product obtained from carbonization of coal, principally coking coal, at high temperature, it is low in moisture and volatile matter. Coke oven coke is used mainly in the iron and steel industry acting as energy source and chemical agent. Coke breeze and foundry coke are included in this category.
Coke
Semi-coke (a solid product obtained from carbonization of coal at low temperature) should be included in this category. Semi-coke is used as a domestic fuel or by the transformation plant itself. This heading also includes coke, coke breeze and semi-coke made from lignite/brown coal.
11 BKB BKB is a composition fuel manufactured from lignite/brown coal, produced by briquetting under high pressure without the addition of a binding agent. These figures include peat briquettes, dried lignite fines and dust.
(Brown Coal Briquettes)
12 Gas Works Covers all types of gases produced in public utility or private plants, whose main purpose is manufacture, transport and distribution of gas. It includes gas produced by carbonization (including gas produced by coke ovens and transferred to gas works gas), by total gasification with or without enrichment with oil products (LPG, residual fuel oil, etc.), and by reforming and simple mixing of gases and/or air, reported under the rows "From Other Sources". Under the transformation sector identify amounts of gas work gas transferred to blended natural gas which will be distributed and consumed through the natural gas grid.
Gas
The production of other coal gases (i.e. coke oven gas, blast furnace gas and oxygen steel furnace gas) should be reported in the columns concerning such gases, and not as production of gas works gas. The coal gases transferred to gas works plants should then be reported (in their own column) in the transformation sector in the gas works plants row. The total amount of gas works gas resulting from transfers of other coal gases should appear in the production line for gas works gas.
13 Coke Oven Obtained as a by-product of the manufacture of coke oven coke for the production of iron and steel.
Gas
14 Blast Furnace Produced during the combustion of coke in blast furnaces in the iron and steel industry. It is recovered and used as a fuel partly within the plant and partly in other steel industry processes or in power stations equipped to burn it. The quantity of fuel should be reported on a gross calorific value basis.
Gas
15 Oxygen Steel By-product of the production of steel in an oxygen furnace, recovered on leaving the furnace. The gas is also known as converter gas, LD gas
or BOS gas.
1.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
Annex A applies for explanations to terms, for which a specific explanation is not supplied in this
annex.
1.2.1. Supply and Transformation Sector
-
1.Production
1.1 of which: underground
Applicable only for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal.
1.2 of which: surface
Applicable only for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal.
2 From Other Sources
This consists of two components:
-
-recovered slurries, middlings and other low-grade coal products, which cannot be classified according to type of coal. This includes coal recovered from waste piles and other waste receptacles.
-
-supplies of fuel of which production is covered in other fuel energy balances, but for which consumption will occur in the coal energy balance.
2.1 of which: from oil products
Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal and peat.
2.3 of which: from renewables
Not applicable for anthracite, coking coal, other bituminous coal, subbituminous coal and lignite/brown coal and peat.
E.g.: industrial waste as binding agent in the manufacturing of patent fuel
3 Imports
4 Exports
5 International Marine Bunkers
6 Stock changes
A stock build is shown as a negative number and a stock draw is shown as a positive number.
7 Gross consumption
8 Statistical differences
9 Total transformation Sector
Quantities of fuels used for the primary or secondary conversion of energy (e.g. coal to electricity, coke oven gas to electricity) or used for the transformation to derived energy products (e.g.: coking coal to coke).
9.1 Of which: Main Activity Producer Electricity Plants
9.2 Of which: Main Activity Producer CHP Plants
9.3 Of which: Main Activity Producer Heat Plants
9.4 Of which: Autoproducer Electricity plants
9.10 Of which: Gas Works
9.11 Of which: Blast Furnaces
Quantities of coking coal and/or bituminous coal (generally referred to as PCI) and coke oven coke transformed in blast furnaces. Amounts used as a fuel for heating and operation of blast furnaces (e.g.: blast furnaces gas) should not be included in the transformation sector, but reported as consumption in the energy sector.
9.12 Of which: Coal Liquefaction
Shale oil and other products derived from liquefaction should be reported as per Chapter 4 of this Annex.
9.13 Of which: For Blended Natural Gas
Quantities of coal gases blended with natural gas.
9.14 Of which: Not Elsewhere Specified Transformation
1.2.2. Energy Sector
1 Total Energy Sector
1.1 Of which: Electricity, CHP and Heat plants
1.2 Of which: Coal Mines
1.3 Of which: Patent Fuel Plants
1.4 Of which: Coke Ovens
1.5 Of which: BKB / PB Plants
3 Total Final Consumption
4 Total Non-energy use
4.1 Of which: Industry, Transformation and Energy Sectors
Non-energy use in all industry, transformation and energy sub-sectors, e.g. coal used to make methanol or ammonia.
4.1.1 From 4.1, of which: in the petrochemical sector
Non-energy use e.g. coal use as feedstocks to produce fertiliser and as feedstocks for other petrochemical products.
4.2 Of which: Transport Sector
Non-energy use in all Transport sub-sectors.
4.3 Of which: Other Sectors
Non-energy use in Commercial and Public Services, Residential, Agriculture and Not Elsewhere Specified Other.
1.2.3. Energy end-use specification
1 Final Energy Consumption
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.11 Of which: Construction
2.12 Of which: Textile and Leather
2.13 Of which: Not Elsewhere Specified - Industry
3 Transport Sector
3.1 Of which: Rail
3.2 Of which: Domestic Navigation
3.3 Of which: Not Elsewhere Specified - Transport
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified Other
1.2.4. Imports and exports
Imports by country of origin, and exports by country of destination.
Not applicable to peat, gas coke, gas works gas, coke oven gas, blast furnace gas nor oxygen steel
These inputs to autoproducers are separated for the main activities listed in the following table:
1 Total Energy Sector
1.1 Of which: Coal Mines
1.2 Of which: Patent Fuel Plants
1.3 Of which: Coke Ovens
1.4 Of which: BKB / PB Plants
1.5 Of which: Gas Works
1.6 Of which: Blast Furnaces
1.7 Of which: Petroleum Refineries
1.8 Of which: Coal Liquefaction
1.9 Of which: Not Elsewhere Specified Energy
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.13 Of which: Not Elsewhere Specified - Industry
3 Transport Sector, of which:
3.1 Of which: Rail
3.2 Of which: Not Elsewhere Specified - Transport
4 Other Sectors:
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified
1.3. CALORIFIC VALUES
Both gross and net calorific values are to be declared for the energy products mentioned in
paragraph 1.1 for the following main aggregates.
Not applicable for gas works gas, coke oven gas, blast furnace gas and oxygen steel furnace gas:
1 Production
2 Imports
1.4. PRODUCTION AND STOCKS IN COAL MINES
Only applicable for hard coal and for lignite/brown coal.
The following quantities must be declared:
1 Underground production
2 Surface production
3 From other sources
4 Stocks at end of period
4.1 Of which: stocks at mines
1.5. UNITS OF MEASUREMENT
1 Energy quantities 103 tonnes
Exception: for gases (gas works gas, coke oven gas, blast furnace gas, oxygen steel furnace gas) the measurement is directly in energy content and the unit to be used is therefore TJ (based on gross calorific values).
2 Calorific values MJ/tonne
1.6. DEROGATIONS AND EXEMPTIONS
Not applicable.
2.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
2.2.1. Supply and Transformation Sector
To be declared are quantities expressed in both volume and energy units, and including the gross
and net calorific values, for the following aggregates:
1 Indigenous Production
All dry marketable production within national boundaries, including offshore production. Production is measured after purification and extraction of NGLs and sulphur.
Excludes extraction losses and quantities reinjected, vented or flared.
Includes quantities used within the natural gas industry; in gas extraction, pipeline systems and processing plants.
1.1 of which: Associated Gas
Natural gas produced in association with crude oil.
1.2 of which: Non-Associated Gas
Natural gas originating from fields producing hydrocarbons only in gaseous form.
1.3 Of which: Colliery Gas
Methane produced at coal mines or from coal seams, piped to the surface and consumed at collieries or transmitted by pipeline to consumers.
2.3 of which: from renewables
biogas for blending with natural gas
3 Imports
4 Exports
5 International Marine Bunkers
6 Stock changes
A stock build is shown as a negative number and a stock draw is shown as a positive number.
7 Gross consumption
8 Statistical differences
The requirement of declaring calorific values is not applicable here.
9 Recoverable gas: opening and closing stocks
Quantities of gas available for delivery during any input-output cycle. This refers to recoverable natural gas stored in special storage facilities (depleted gas and/or oil field, aquifer, salt cavity, mixed caverns, or other) as well as liquefied natural gas storage. Cushion gas should be excluded.
The requirement of declaring calorific values is not applicable here.
10 Gas Vented
The volume of gas released into the air on the production site or at the gas processing plant.
12 Total transformation Sector
Quantities of fuels used for the primary or secondary conversion of energy (e.g. natural gas to electricity) or used for the transformation to derived energy products (e.g. natural gas to methanol).
12.1 Of which: Main Activity Producer Electricity Plants
12.2 Of which: Autoproducer Electricity plants
12.3 Of which: Main Activity Producer CHP Plants
12.4 Of which: Autoproducer CHP plants
12.5 Of which: Main Activity Producer Heat Plants
12.6 Of which: Autoproducer Heat plants
12.7 Of which: Gas Works
12.8 Of which: Coke Ovens
12.9 Of which: Blast Furnaces
12.10 Of which: Gas to liquids
Quantities of natural gas used as feedstock for the conversion to liquids e.g. the quantities of fuel entering the methanol production process for transformation into methanol.
12.11 Of which: Non specified Transformation
1.6 Of which: Gas Works
1.7 Of which: Electricity, CHP and Heat Plants
1.8 Of which: Liquefaction (LNG) or Gasification
1.9 Of which: Gas to Liquids
1.10 Of which: Not Elsewhere Specified Energy
2 Losses of distribution and transport
2.2.3. Energy end-use specification
Consumption of natural gas needs to be reported for both energy use and (wherever applicable)
non-energy use separately, for all of the following aggregates:
1 Total Final Consumption
Final energy consumption and non-energy use to be declared separately under this heading.
-
2.Transport Sector
2.1 Of which: Transport by road
Includes both CNG and biogas.
2.1.1 Of which: Biogas fraction in Transport by Road
2.2 Of which: Pipeline transport
2.3 Of which: Not Elsewhere Specified Transport
3.6 Of which: Machinery
3.7 Of which: Mining and Quarrying
3.8 Of which: Food, Beverages and Tobacco
3.9 Of which: Pulp, Paper and printing
3.10 Of which: Wood and Wood Products
3.11 Of which: Construction
3.12 Of which: Textile and Leather
3.13 Of which: Not Elsewhere Specified Industry
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified Other
2.2.4. Imports and exports
To be declared are both the quantities of the total natural gas and of the LNG part of it, per country
of origin for imports and per country of destination for exports.
Inputs apply to the following plants or activities:
1 Total Energy Sector
1.1 Of which: Coal Mines
1.2 Of which: Oil and Gas Extraction
1.3 Of which: Inputs to Oil Refineries
1.4 Of which: Coke Ovens
1.5 Of which: Gas Works
1.6 Of which: Blast Furnaces
1.7 Of which: Liquefaction (LNG) & Regasification Plants
1.8 Of which: Gas to Liquids
1.9 Of which: Not Elsewhere Specified Energy
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.6 Of which: Machinery
2.7 Of which: Mining and Quarrying
2.13 Of which: Not Elsewhere Specified Industry
3 Transport Sector, of which:
3.1 Of which: Pipeline Transport
3.2 Of which: Not Elsewhere Specified Transport
4 Other Sectors, of which:
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified
2.2.6. Gas Storage Capacities
1 Name
Name of the site of the storage facility.
2 Type
Type of storage, such as depleted gas field, salt cavern, etc.
3 Working Capacity
Total gas storage capacity, minus the cushion gas. The cushion gas is the total volume of gas required as a permanent inventory to maintain adequate underground storage reservoir pressures and deliverability rates throughout the output cycle.
2.3. UNITS OF MEASUREMENT
1 Energy quantities Unless indicated differently, quantities of natural gas are declared by
its energy content, i.e. in TJ, based on the gross calorific value.
Where physical quantities are required, the unit is in 106 m3
assuming reference gas conditions (15°C, 101.325 kPa).
2 Calorific values KJ/m3, assuming reference gas conditions (15°C, 101.325 kPa).
3 Storage working 106 m3, assuming reference gas conditions (15°C, 101.325 kPa).
capacity
4 Peak output 106 m3/day, assuming reference gas conditions (15°C, 101.325 kPa).
2.4. DEROGATIONS AND EXEMPTIONS
Not applicable.
-
3.ELECTRICITY AND HEAT
3.1. APPLICABLE ENERGY PRODUCTS
This chapter covers heat and electricity.
3.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
3.2.1. Supply and Transformation Sector
The following specific definitions apply to aggregates for electricity and heat in this chapter:
-
-Gross Electricity Production: the sum of the electrical energy production by all the generating
sets concerned (including pumped storage) measured at the output terminals of the main
generators.
-
-Gross Heat Production: the total heat produced by the installation and includes the heat used
by the installation's auxiliaries which use a hot fluid (space heating, liquid fuel heating etc)
and losses in the installation/network heat exchanges, as well as heat from chemical processes
used as a primary energy form.
-
-Net Electricity Production: the gross electricity production less the electrical energy absorbed
by the generating auxiliaries and the losses in the main generator transformers.
-
-Net Heat Production: the heat supplied to the distribution system as determined from
measurements of the outgoing and return flows.
The aggregates mentioned in the next table must be declared separately for main activity producer
plants and for autoproducer plants. Within these two types of plants, both gross and net electricity
and heat production must be declared for electricity only, for CHP and for heat only plants
separately wherever applicable, for the following aggregates:
1.5 Of which: Tide, wave, ocean
1.6 Of which: Wind
1.7 Of which: Combustible fuels
Fuels capable of igniting or burning, i.e. reacting with oxygen to produce a significant rise in temperature and combusted directly for the production of electricity and/or heat.
1.8 Of which: Heat Pumps
Heat output from heat pumps only where the heat is sold to third parties (i.e. in cases where production occurs in the Transformation Sector).
1.9 Of which: Electric Boilers
Quantities of heat from electric boilers where the output is sold to third parties.
1.10 Of which: Heat from Chemical Processes
Heat originating from processes without input energy, such as a chemical reaction.
Excludes waste heat originating from energy driven processes, which should be reported as heat produced from the corresponding fuel.
1.11 Of which: Other Sources Electricity (please specify)
The aggregates mentioned in the next table must be declared as totals, for electricity and heat
separately, wherever applicable. For the three first aggregates in the next table, quantities should be
calculated from and compatible with the values declared according to the previous table.
-
5.Exports
Amounts of electricity are considered as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not. If electricity is transited through a country, the amount should be reported as both
an import and an export.
-
6.Used for Heat Pumps
-
7.Used for Electric Powered Steam Boilers
-
8.Used for Pumped Storage
-
9.Used for Electricity Production
-
10.Energy Supplied
For electricity: the sum of the net electrical energy production supplied by all power stations within the country, reduced by the amount used simultaneously for heat pumps, electrically powered steam boilers, pumping and reduced or increased by exports to or imports from abroad.
For heat: the sum of the net heat production for sale by all plants within a country, reduced by heat used for electricity production and reduced or increased by exports or imports from abroad.
-
11.Transmission and Distribution Losses
All losses due to transport and distribution of electrical energy and heat.
For electricity, includes losses in transformers which are not considered as integral parts of the power plants.
The electricity produced, the heat sold and the fuel quantities used including their corresponding
total energy (based on their net calorific value except for natural gas which is based on gross
calorific value) from the combustibles listed in the next table must be declared separately for main
activity producer plants and for autoproducer plants. Within these two types of plants, this
electricity and heat production must be declared for electricity (only) plants, for CHP and for heat
(only) plants separately wherever applicable:
1 Solid fuels and manufactured gases:
1.1 Anthracite
1.2 Coking Coal
1.3 Other Bituminous Coal
1.4 Sub-Bituminous Coal
1.5 Lignite/Brown Coal
1.6 Peat
1.7 Patent Fuel
1.8 Coke Oven Coke
1.9 Gas Coke
1.10 Coal Tar
1.11 BKB (Brown Coal Briquettes)
2.3 Refinery Gas
2.4 LPG
2.5 Naphtha
2.6 Kerosene Type Jet Fuel
2.7 Other Kerosene
2.8 Gas/Diesel (Distillate Fuel Oil)
2.9 Heavy Fuel Oil
2.10 Bitumen (Including Orimulsion)
2.11 Petroleum Coke
2.12 Other Oil Products
3 Natural Gas
4 Renewable Energy and Energy from Waste:
4.1 Industrial Waste (Non-Renewable)
4.2 Municipal Waste (Renewable)
4.3 Municipal Waste (Non-Renewable)
4.4 Wood, Wood Waste And Other Solid Waste
1.3 Of which: Patent Fuel Plants
1.4 Of which: Coke Ovens
1.5 Of which: BKB / PB Plants
1.6 Of which: Gas Works
1.7 Of which: Blast Furnaces
1.8 Of which: Petroleum Refineries
1.9 Of which: Nuclear Industry
1.10 Of which: Coal Liquefaction Plants
1.11 Of which: Liquefaction (LNG) / Regasification Plants
1.12 Of which: Gasification Plants (biogas)
1.13 Of which: Gas-to-Liquids
1.14 Of which: Not Elsewhere Specified Energy
3.2.3. Energy end-use specification
1 Industry Sector
1.1 Of which: Iron and Steel
1.2 Of which: Chemical and Petrochemical
1.10 Of which: Wood and Wood Products
1.11 Of which: Construction
1.12 Of which: Textile and Leather
1.13 Of which: Not Elsewhere Specified Industry
2 Transport Sector
2.1 Of which: Rail
2.2 Of which: Pipeline transport
2.3 Of which: Not Elsewhere Specified Transport
3 Residential Sector
4 Commercial and Public Services
5 Agriculture/Forestry
6 Fishing
7 Not Elsewhere Specified Other
3.2.4 .Imports and exports
Imports and exports of energy quantities of electricity and heat by country.
3.2.5. Net production of electricity generation and net heat production from autoproducers
Net production of electricity and net generation of heat from autoproducers of electricity generation
1.4 Of which: Coke Ovens
1.5 Of which: BKB / PB Plants
1.6 Of which: Gas Works
1.7 Of which: Blast Furnaces
1.8 Of which: Petroleum Refineries
1.9 Of which: Coal Liquefaction Plants
1.10 Of which: Liquefaction (LNG) / Regasification Plants
1.11 Of which: Gasification Plants (biogas)
1.12 Of which: Gas-to-Liquids
1.13 Of which: Charcoal Production Plants
1.14 Of which: Not Elsewhere Specified Energy
2 All other sectors: identical to the aggregate list as per "3.2.3 Energy end-use specification".
3.2.6. Inputs to autoproducers of electricity and heat generation
Inputs to autoproducers of electricity and heat generation are to be declared separately for
Autoproducer Electricity Plants, Autoproducer CHP Plants and Autoproducer Heat Plants.
1.) For solid fuels and manufactured gases used by autoproducers, quantities must be reported
1 Total Energy Sector
1.1 Of which: Coal Mines
1.2 Of which: Patent Fuel Plants
1.3 Of which: Coke Ovens
1.4 Of which: BKB/PB Plants
1.5 Of which: Gas Works
1.6 Of which: Blast Furnaces
1.7 Of which: Petroleum Refineries
1.8 Of which: Coal Liquefaction
1.9 Of which: Not Elsewhere Specified Energy
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.6 Of which: Machinery
2.7 Of which: Mining and Quarrying
3 Transport Sector:
3.1 Of which: Rail
3.2 Of which: Not Elsewhere Specified Transport
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified
2.) For oil products used by autoproducers, quantities must be reported from the following energy
products: crude oil, NGL, refinery gas, LPG, naphtha, kerosene type jet fuel, other kerosene,
gas/diesel (distillate fuel oil), heavy fuel oil, bitumen (including Orimulsion), petroleum coke
and other oil products. Their input quantities must be reported for the plants in the following
activities:
1 Total Energy Sector
1.1 Of which: Coal Mines
1.2 Of which: Oil and Gas Extraction
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.6 Of which: Machinery
2.7 Of which: Mining and Quarrying
2.8 Of which: Food, Beverages and Tobacco
2.9 Of which: Pulp, Paper and printing
2.10 Of which: Wood and Wood Products
2.11 Of which: Construction
2.12 Of which: Textile and Leather
2.13 Of which: Not Elsewhere Specified Industry
3 Transport Sector:
3.1 Of which: Pipeline Transport
3.2 Of which: Not Elsewhere Specified Transport
4 Other Sectors
4.1 Of which: Commercial and Public Services
3.) For natural gas used by autoproducers, quantities must be reported for the plants in the
following activities:
1 Total Energy Sector
1.1 Of which: Coal Mines
1.2 Of which: Oil and Gas Extraction
1.3 Of which: Inputs to Oil Refineries
1.4 Of which: Coke Ovens
1.5 Of which: Gas Works
1.6 Of which: Blast Furnaces
1.7 Of which: Liquefaction (LNG) & Regasification Plants
1.8 Of which: Gas to Liquids
1.9 Of which: Not Elsewhere Specified Energy
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.13 Of which: Not Elsewhere Specified Industry
3 Transport Sector:
3.1 Of which: Pipeline Transport
3.2 Of which: Not Elsewhere Specified Transport
4 Other Sectors:
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified
4.) For renewable energy and energy from waste used by autoproducers, quantities must be
reported from the following energy products: geothermal energy, solar thermal, industrial
waste (non-renewable), municipal waste (renewable), municipal waste (non-renewable),
wood/wood waste/other solid waste, landfill gas, sewage sludge gas, other biogas and liquid
biofuels. Their input quantities must be reported for the plants in the following activities:
1.9 Of which: Charcoal Production Plants
1.10 Of which: Not Elsewhere Specified Energy
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.6 Of which: Machinery
2.7 Of which: Mining and Quarrying
2.8 Of which: Food, Beverages and Tobacco
2.9 Of which: Pulp, Paper and printing
2.10 Of which: Wood and Wood Products
2.11 Of which: Construction
2.12 Of which: Textile and Leather
2.13 Of which: Not Elsewhere Specified Industry
3.3. STRUCTURAL DATA ON ELECTRICITY AND HEAT GENERATION
3.3.1. Net Maximum Electrical Capacity And Peak Load
The capacity should be reported at 31st December of the relevant reported year.
Includes electrical capacity of both electricity (only) and CHP plants.
The Net Maximum Electrical Capacity is the sum of the net maximum capacities of all stations
taken individually throughout a given period of operation. The period of operation assumed for
present purposes is continuous running: in practice 15 hours or more per day. The net maximum
capacity is the maximum power assumed to be solely active power that can be supplied,
continuously, with all plant running, at the point of outlet to the network.The Peak Load is defined
as the highest value of the power absorbed or supplied by a network or combination of networks
within the country.
The following quantities must be declared only for the network
-
1.Total
-
2.Nuclear
-
3.Hydro
3.1 Of which: pumped storage
-
4.Geothermal
-
5.Solar
8.4 Of which: Combined cycle
8.5 Of which: Other
To be specified if declared.
-
9.Peak load
-
10.Available capacity at time of peak
-
11.Date and time of peak load occurrence
3.3.2. Net Maximum Electrical Capacity Of Combustible Fuels
Net maximum electrical capacity of combustible fuels must be declared for both main activity
producers and autoproducers, and separately for each type of single-fired or multi-fired plant
mentioned in the next table. Indications on which type of fuel is used as primary and alternate fuels
must be added for all cases of multi-fired plants.
-
1.Single Fuel Fired:
1.1 Fired with Coal or coal products
Includes coke oven gas, blast furnace and oxygen steel furnace gas capacity.
1.2 Fired with Liquids fuels
Includes refinery gas capacity.
3 Multi-Fired, Solids And Natural Gas
4 Multi-Fired, Liquids And Natural Gas
5 Multi-Fired, Solids Liquids And Natural Gas
Multi-fired systems include only units which can burn more than one fuel type on a continuous
basis. Stations which have separate units using different fuels should be divided into the appropriate
single-fuel categories.
3.4. UNITS OF MEASUREMENT
1 Energy quantities Electricity: GWh
Heat: TJ
Solid fuels and manufactured gases: the units of measurement in Chapter 1 of this annex apply.
Natural gas: the units of measurement in chapter 2 of this annex apply.
Oil and petroleum products: the units of measurement in chapter 4 of this annex apply.
Renewables and waste: the units of measurement in chapter 5 of this annex apply.
2 Capacity Electrical generation capacity: MWe
-
4.OIL AND PETROLEUM PRODUCTS
4.1. APPLICABLE ENERGY PRODUCTS
Unless otherwise specified this data collection applies to all of the following energy products :
Energy Definition
Product
1 Crude Oil Crude oil is a mineral oil of natural origin comprising a mixture of hydrocarbons and associated impurities, such as sulphur. It exists in the liquid phase under normal surface temperature and pressure and its physical characteristics (density, viscosity, etc.) are highly variable. This category includes field or lease condensate recovered from associated and non-associated gas where it is commingled with the commercial crude oil stream.
2 NGL NGL are liquid or liquefied hydrocarbons recovered from natural gas in separation facilities or gas processing plants. Natural gas liquids include ethane, propane, butane (normal and iso-), (iso) pentane and pentanes plus (sometimes referred to as natural gasoline or plant condensate).
3 Refinery A refinery feedstock is a processed oil destined for further processing (e.g. straight run fuel oil or vacuum gas oil) excluding blending. With further processing, it will be transformed into one or more components and/or finished products. This definition also covers returns from the petrochemical industry to the refining industry (e.g. pyrolysis gasoline, C4 fractions, gasoil and fuel oil fractions).
Feedstocks
4 Additives/ Additives are non-hydrocarbon compounds added to or blended with a product to modify fuel properties (octane, cetane, cold properties,
etc.):
4.1 Of Which: Biogasoline and Biodiesels. The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply.
Biofuels
Quantities of liquid biofuels reported in this category relate to the biofuel and not to the total volume of liquids into which the biofuels are blended.
Excludes all trade of biofuels which have not been blended with transport fuels (i.e. in their pure form); these should be reported as per Chapter 5. The biofuels traded as part of transport fuels should be reported in the appropriate product indicating the biofuel portion.
5 Other Hydro-Synthetic crude oil from tar sands, shale oil, etc., liquids from coal liquefaction, (see Chapter 1), output of liquids from natural gas conversion into gasoline (see Chapter 2), hydrogen and emulsified oils (e.g. Orimulsion).
carbons
Excludes oil shale production, for which Chapter 1 applies.
The production of shale oil (secondary product) is to be reported as "From other sources" in the "Other hydrocarbons category".
6 Refinery Gas Refinery gas includes a mixture of non-condensible gases mainly consisting of hydrogen, methane, ethane and olefins obtained during distillation of crude oil or treatment of oil products (e.g. cracking) in refineries. This also includes gases which are returned from the petrochemical industry.
(not liquefied)
7 Ethane A naturally gaseous straight-chain hydrocarbon, (C2H6) extracted from natural gas and refinery gas streams.
8 LPG LPG are light paraffinic hydrocarbons derived from the refinery processes, crude oil stabilisation and natural gas processing plants. They consist mainly of propane (C
3H
-
8)and butane (C
4H
l0) or a
combination of the two. They could also include propylene, butylene, isopropylene and isobutylene. LPG are normally liquefied under pressure for transportation and storage.
10 Motor Motor gasoline consists of a mixture of light hydrocarbons distilling between 35°C and 215°C. It is used as a fuel for land based spark ignition engines. Motor gasoline may include additives, oxygenates and octane enhancers, including lead compounds such as TEL and TML.
Gasoline
Includes motor gasoline blending components (excluding additives/ oxygenates), e.g. alkylates, isomerate, reformate, cracked gasoline destined for use as finished motor gasoline.
10.1 Of which: The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply.
Biogasoline
11 Aviation Motor spirit prepared especially for aviation piston engines, with an octane number suited to the engine, a freezing point of -60°C and a distillation range usually within the limits of 30°C and 180°C.
Gasoline
12 Gasoline This includes all light hydrocarbon oils for use in aviation turbine power units, distilling between 100°C and 250°C. They are obtained by blending kerosenes and gasoline or naphthas in such a way that the aromatic content does not exceed 25% in volume, and the vapour pressure is between 13.7kPa and 20.6kPa.
Type Jet Fuel (Naphtha Type Jet Fuel
or JP4)
13 Kerosene Distillate used for aviation turbine power units. It has the same distillation characteristics between 150°C and 300°C (generally not above 250°C) and flash point as kerosene. In addition, it has particular specifications (such as freezing point) which are established by the International Air Transport Association (IATA).
Type Jet Fuel
Includes kerosene blending components.
14 Other Refined petroleum distillate used in sectors other than aircraft transport. It distils between 150°C and 300°C.
Kerosene
15 Gas/Diesel Gas/diesel oil is primarily a medium distillate distilling between 180°C and 380°C. Includes blending components. Several grades are available depending on uses:
15.2 Of which: Light heating oil for industrial and commercial uses, marine diesel and diesel used in rail traffic, other gas oil including heavy gas oils which distil between 380°C and 540°C and which are used as petrochemical feedstocks.
Heating and Other Gasoil
16 Fuel Oil All residual (heavy) fuel oils (including those obtained by blending). Kinematic viscosity is above 10 cSt at 80°C. The flash point is always above 50°C and density is always more than 0.90 kg/l.
16.1 Of which: Heavy fuel oil with sulphur content lower than 1%.
Low Sulphur Content
16.2 Of which: Heavy fuel oil with sulphur content of 1% or higher.
High Sulphur Content
17 White Spirit Refined distillate intermediates with a distillation in the naphtha/kerosene range. They are sub-divided as:
And SBP
-
-Industrial Spirit (SBP): Light oils distilling between 30°C and 200°C. There are 7 or 8 grades of industrial spirit, depending on the position of the cut in the distillation range. The grades are defined according to the temperature difference between the 5% volume and 90% volume distillation points (which is not more than 60°C).
-
-White Spirit: Industrial spirit with a flash point above 30°C. The distillation range of white spirit is 135°C to 200°C.
18 Lubricants Hydrocarbons produced from distillate by product; they are mainly used to reduce friction between bearing surfaces.
Includes all finished grades of lubricating oil, from spindle oil to cylinder oil, and those used in greases, motor oils and all grades of lubricating oil base stocks.
20 Paraffin These are saturated aliphatic hydrocarbons. These waxes are residues extracted when dewaxing lubricant oils. They have a crystalline structure which is more-or-less fine according to the grade. Their main characteristics are as follows: they are colourless, odourless and translucent, with a melting point above 45°C.
Waxes
21 Petroleum Black solid by-product, obtained mainly by cracking and carbonising petroleum derived feedstock, vacuum bottoms, tar and pitches in processes such as delayed coking or fluid coking. It consists mainly of carbon (90 to 95%) and has a low ash content. It is used as a feedstock in coke ovens for the steel industry, for heating purposes, for electrode manufacture and for production of chemicals. The two most important qualities are "green coke" and "calcinated coke".
Coke
Includes "catalyst coke" deposited on the catalyst during refining processes; this coke is not recoverable and is usually burned as refinery fuel.
22 Other All products not specifically mentioned above, for example: tar and sulphur.
Products
Includes aromatics (e.g. BTX or benzene, toluene and xylene) and olefins (e.g. propylene) produced within refineries.
4.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
4.2.1. Supply and Transformation Sector
2.1 of which: from Coal
Includes liquids produced from coal liquefaction plants, liquid output from coke ovens.
2.2 of which: from Natural Gas
The manufacture of synthetic gasoline may require natural gas as feedstock. The amount of gas for methanol manufacture is declared according to Chapter 2, while the receipts of methanol are declared here.
2.3 of which: from Renewables
Includes biofuels which are for blending with transport fuels.
Production is declared as per Chapter 5, while amounts for blending are declared here.
3 Backflows From Petrochemical Sector
Finished or semi-finished products which are returned from final consumers to refineries for processing, blending or sale. They are usually by-products of petrochemical manufacturing.
Only applicable for refinery feedstocks.
4 Products Transferred
Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers.
Only applicable for refinery feedstocks.
5 Imports and exports
Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment.
6 Direct Use
Crude oil, NGL, Additives and Oxygenates (and the part which are biofuels), and other hydrocarbons used directly without being processed in petroleum refineries.
Includes crude oil burned for electricity generation.
7 Stock changes
A stock build is shown as a negative number and a stock draw is shown as a positive number.
8 Calculated Refinery Intake
Total amount of product calculated to have entered the refinery process. It is defined
as:
Indigenous production + From other sources + Backflows from industry + Products transferred + Imports Exports - Direct use + Stock changes
9 Statistical differences
Defined as the calculated refinery intake minus the observed one.
10 Observed Refinery Intake
Amounts measured as input to refineries
11 Refinery Losses
The difference between Refinery intake (observed) and Gross refinery output. Losses may occur during the distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.
12 Opening and Closing Total Stocks On National Territory
The following table applies only to finished products (Refinery gas, Ethane, LPG, Naphtha, Motor
gasoline, Aviation gasoline, Gasoline type jet fuel, Kerosene type jet fuel, Other kerosene,
Gas/Diesel oil, Low and High sulphur fuel oil, White Spirit and SBP, Lubricants, Bitumen, Paraffin
waxes, Petroleum coke and Other products). Crude oil and NGL used for direct burn should be
included in deliveries of finished products and interproduct transfers:
1 Primary Product Receipts
Includes quantities of indigenous or imported crude oil (including condensate) and indigenous NGL used directly without being processed in a petroleum refinery and quantities of Backflows from the Petrochemical industry which, although not primary fuel, are used directly.
2 Gross Refinery Output
Production of finished products at a refinery or blending plant.
Excludes refinery losses, but includes Refinery fuel.
3 Recycled Products
Finished products which pass a second time through the marketing network, after having been once delivered to final consumers (e.g. used lubricants which are reprocessed). These quantities should be distinguished from petrochemical Backflows.
4 Refinery Fuel
Petroleum products consumed in support of the operation of a refinery.
Excludes products used by oil companies outside the refining process, e.g. bunkers or
oil tankers.
Includes fuels used for the production at the refineries of electricity and heat sold.
7 Interproduct Transfers
Quantities reclassified either because their specification has changed or because they are blended into another product.
A negative entry for one product is compensated by a positive entry (or several entries) for one or several products and vice versa; the total net effect should be zero.
8 Products Transferred
Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers.
9 Stock Changes
A stock build is shown as a negative number and a stock draw is shown as a positive number.
10 Calculated Gross Inland Deliveries
This is defined as:
Primary product receipts + Gross refinery output + Recycled products - Refinery fuel + Imports Exports - International marine bunkers + Interproduct transfers - Products transferred + Stock changes
11 Statistical Difference
Defined as the calculated gross inland delivery minus the observed one.
12 Observed Gross Inland Deliveries
The observed delivery of finished petroleum products from primary sources (e.g. refineries, blending plants, etc.) to the inland market.
12.3 of which: Non-Energy Use In The Petrochemical Sector
Quantities of oil used in the petrochemical sector for the purpose of producing ethylene, propylene, butylene, synthesis gas, aromatics, butadiene and other hydrocarbon-based raw materials in processes such as steam cracking, aromatics plants and steam reforming. Exclude amounts of oil used for fuel purposes.
13 Backflows From Petrochemical Sector To Refineries
14 Opening and Closing Stock Levels
All stocks on national territory, including stocks held by governments, by major consumers or by stockholding organisations, stocks held on board incoming ocean vessels, stocks held in bonded areas and stocks held for others, whether under bilateral government agreement or not. Opening and closing refers to the first and to the last day of the reporting period respectively.
15 Stock Changes At Public Utilities
Changes in stocks which are held by public utilities and not included in the Stock levels and Stock changes reported elsewhere. A stock build is shown as a negative number and a stock draw is shown as a positive number.
Includes Crude oil and NGL used for direct burn, if applicable.
16 Net Calorific Value Of Gross Inland Deliveries
For the transformation sector the following aggregates apply for all fuels, except for refinery
feedstocks, additives/ oxygenates, biofuels and other hydro-carbons, but including fuels used for
non energy purposes (petroleum cokes and others, to be declared separately):
1.5 Of which: Main Activity Producer Heat Plants
1.6 Of which: Autoproducer Heat plants
1.7 Of which: Gas Works/Gasification Plants
1.8 Of which: Blended Natural Gas
1.9 Of which: Coke Ovens
1.10 Of which: Blast Furnaces
1.11 Of which: Petrochemical Industry
1.12 Of which: Patent Fuel Plants
1.13 Of which: Not Elsewhere Specified Transformation
4.2.2. Energy Sector
For the energy sector the following aggregates apply for all fuels, except for refinery feedstocks,
additives/oxygenates, befouls and other hydro-carbons, but including fuels used for non energy
purposes (petroleum cokes and others, to be declared separately):
1 Total Energy Sector
Total quantity used as energy in the energy sector
1.1 Of which: Coal Mines
1.2 Of which: Oil and Gas Extraction
4.2.3. Energy end-use specification
For the energy end-use specification the following aggregates apply for all fuels, except for refinery
feedstocks, additives/ oxygenates, biofuels and other hydro-carbons, but including fuels used for
non energy purposes (petroleum cokes and others, to be declared separately):
1 Final Energy Consumption
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.6 Of which: Machinery
2.7 Of which: Mining and Quarrying
2.8 Of which: Food, Beverages and Tobacco
2.9 Of which: Pulp, Paper and printing
2.10 Of which: Wood and Wood Products
2.11 Of which: Construction
2.12 Of which: Textile and Leather
3.5 Of which: Domestic Navigation
3.6 Of which: Pipeline Transport
3.7 Of which: Not Elsewhere Specified - Transport
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified Other
5 Total Non-Energy Use
Quantities used as raw materials in the different sectors and not consumed as a fuel or transformed into another fuel. These quantities are included into the aggregates listed above.
5.1 Of which: Transformation Sector
5.2 Of which: Energy Sector
5.3 Of which: Transport Sector
5.4 Of which: Industry Sector
5.4.1 Industry Sector of which: Chemical (incl. Petrochemical)
4.2.5. Inputs to autoproducers of electricity and heat generation
Inputs to autoproducers of electricity and heat generation are to be declared separately for electricity
only plants, for CHP plants, and for heat only plants.
Excludes the following energy products: refinery feedstocks, additives/ oxygenates, biofuels, other
hydro-carbons, ethane, motor gasoline, biogasoline, aviation gasoline, gasoline type jet fuel
(naphtha type jet fuel or JP4), white spirit and SBP, and lubricants.
Inputs apply to the following plants or activities:
1 Total Energy Sector
Total quantity used as energy in the energy sector
1.1 Of which: Coal Mines
1.2 Of which: Oil and Gas Extraction
1.3 Of which: Coke Ovens
1.4 Of which: Blast Furnaces
1.5 Of which: Gas Works
1.6 Of which: Not Elsewhere Specified Energy
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.10 Of which: Wood and Wood Products
2.11 Of which: Construction
2.12 Of which: Textile and Leather
2.13 Of which: Not Elsewhere Specified - Industry
3 Transport Sector
3.1 Of which: Pipeline Transport
3.2 Of which: Not Elsewhere Specified - Transport
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified Other
4.3. UNITS OF MEASUREMENT
1 Energy quantities 103 tonnes
-
5.RENEWABLE ENERGY AND ENERGY FROM WASTE
5.1. APPLICABLE ENERGY PRODUCTS
Unless otherwise specified this data collection applies to all of the following energy products:
Energy Definition
Product
-
1.Hydro power Potential and kinetic energy of water converted into electricity in hydroelectric plants. Pumped storage must be included. Production must be reported for plant sizes of < 1 MW, 1 to <10 MW, 10 MW and from pumped storage.
-
2.Geothermal Energy available as heat emitted from within the earth's crust, usually in the form of hot water or steam. This energy production is the difference between the enthalpy of the fluid produced in the production borehole and that of the fluid eventually disposed of. It is exploited at suitable sites:
· for electricity generation using dry steam or high enthalpy brine
after flashing
· directly as heat for district heating, agriculture etc.
-
3.Solar Energy Solar radiation exploited for hot water production and electricity generation. This energy production is the heat available to the heat transfer medium, i.e. the incident solar energy less the optical and collectors losses. Passive solar energy for the direct heating, cooling and lighting of dwellings or other buildings is not included.
3.1 Of which: Solar Photovoltaic Sunlight converted into electricity by the use of solar cells usually made of semi-conducting material which exposed to light will generate electricity.
3.2 Of which: Solar Thermal Heat from solar radiation; can consist of :
-
7.Municipal
Waste: Wastes produced by households, hospitals and the tertiary sector incinerated at specific installations, on a net calorific value basis.
7.1 Of which: Renewable The portion of municipal waste which is of biological origin.
7.2 Of which: Non- Renewable The portion of municipal waste which is of non-biological origin.
-
8.Solid Biomass: Covers organic, non-fossil material of biological origin which may be
used as fuel for heat production or electricity generation. It comprises:
8.1 Of which: Charcoal The solid residue of the destructive distillation and pyrolysis of wood and other vegetal material.
8.2 Of which: Wood, Wood Wastes, Other Solid Wastes Purpose-grown energy crops (poplar, willow etc.), a multitude of woody materials generated by an industrial process (wood/paper industry in particular) or provided directly by forestry and agriculture (firewood, wood chips, wood pellets, bark, sawdust, shavings, chips, black liquor etc.) as well as wastes such as straw, rice husks, nut shells, poultry litter, crushed grape dregs etc. Combustion is the preferred technology for these solid wastes. The quantity of fuel used should be reported on a net calorific value basis.
-
9.Biogas: A gas composed principally of methane and carbon dioxide produced by anaerobic digestion of biomass.
9.1 Of which: Landfill Gas A biogas formed by the digestion of landfilled wastes
9.2 Of which: Sewage Sludge Gas A biogas produced from the anaerobic fermentation of sewage sludge
9.3 Of which: Other Biogas Biogas produced from the anaerobic fermentation of animal slurries and of wastes in abattoirs, breweries and other agro-food industries
10.1 Of which: Biogasoline This category includes bioethanol (ethanol produced from biomass and/or the biodegradable fraction of waste), biomethanol (methanol produced from biomass and/or the biodegradable fraction of waste), bioETBE (ethyl-tertio-butyl-ether produced on the basis of bioethanol;
the percentage by volume of bioETBE that is calculated as biofuel is 47%) and bioMTBE (methyl-tertio-butyl-ether produced on the basis of
biomethanol: the percentage by volume of bioMTBE that is calculated
as biofuel is 36%).
10.2 Of which: Biodiesels This category includes biodiesel (a methyl-ester produced from vegetable or animal oil, of diesel quality), biodimethylether (dimethylether produced from biomass), Fischer Tropsch (Fischer Tropsch produced from biomass), cold extracted bio-oil (oil produced from oil seed through mechanical processing only) and all other liquid biofuels which are added to, blended with or used straight as transport diesel.
10.3 Of which: Other Liquid Biofuels Liquid biofuels, used directly as fuel, not included in biogasoline or biodiesels.
5.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
5.2.1. Gross Electricity and Heat Production
Electricity and heat produced from the energy products mentioned in Subtitle 5.1 (except for
charcoal and including the total sum only of the liquid biofuels) must be declared, wherever
5.2.2. Supply and Transformation Sectors
Quantities of energy products that are mentioned in Subtitle 5.1 (except for hydro power, solar
photovoltaic energy, energy from tides, waves and oceans and wind energy) and used in the Supply
and Transformation Sectors must be declared for the following aggregates:
1 Production
2 Imports
3 Exports
4 Stock changes
A stock build is shown as a negative number and a stock draw is shown as a positive number.
5 Gross consumption
6 Statistical differences
7 Total transformation Sector
Quantities of renewables and wastes used for the conversion of primary forms of energy to secondary (e.g. landfill gases to electricity) or used for the transformation to derived energy products (e.g.: biogas used for blended natural gas).
7.1 Of which: Main Activity Producer Electricity Plants
7.2 Of which: Main Activity Producer CHP Plants
7.3 Of which: Main Activity Producer Heat Plants
7.4 Of which: Autoproducer Electricity plants
7.9 Of which: Gas Works Gas
Quantities of renewables and wastes used to produce gas works gas. Renewables and wastes used for heating and operation of equipment must be reported as consumption
in the Energy sector.
7.10 Of which: For blended natural gas
Quantities of biogases blended with natural gas.
7.11 Of which: For Blending to Motor Gasoline / Diesel
Quantities of liquid biofuels which are not delivered to the final consumption but are used with other petroleum products reported as per chapter 4 of this annex.
7.12 Of which: Charcoal production plants
Quantities of wood used for the production of Charcoal.
9.13 Of which: Not Elsewhere Specified Transformation
5.2.3. Energy Sector
Quantities of energy products that are mentioned in Subtitle 5.1 (except for hydro power, solar
photovoltaic energy, energy from tides, waves and oceans and wind energy) and used in the energy
sector or for final consumption must be declared for the following aggregates:
1 Total Energy Sector
Renewable energies and wastes consumed by the energy industry to support the transformation activity. For example renewable energies and wastes used for heating, lighting or operating pumps/compressors.
Quantities of renewable energies and wastes transformed into another energy form should be reported under the Transformation sector.
1.8 Of which: Gas Works Gas
1.9 Of which: Blast Furnaces
1.10 Of which: Charcoal production plants
1.11 Of which: Not Elsewhere Specified
2 Distribution Losses
All losses occurred due to transport and distribution.
5.2.4. Energy end-use
Quantities of energy products that are mentioned in Subtitle 5.1 (except for hydro power, solar
photovoltaic energy, energy from tides, waves and oceans and wind energy) must be declared for
the following aggregates:
1 Final Energy Consumption
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.13 Of which: Not Elsewhere Specified Industry
3 Transport Sector
3.1 Of which: Rail
3.2 Of which: Road
3.3 Of which: Domestic Navigation
3.4 Of which: Not Elsewhere Specified Transport
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified Other
5.2.5. Technical Characteristics of Installations
The following electricity generation capacities are to be declared as applicable at the end of the
reported year:
1 Hydro power
Capacity must be reported for plant sizes of < 1 MW, 1 to <10 MW, 10 MW and from pumped storage, as well as for all sizes combined. Detailed plant sizes should be reported net of pumped storage.
9 Wood, Wood Wastes, Other Solid Wastes
10 Landfill Gas
11 Sewage Sludge Gas
12 Other Biogas
13 Liquid Biofuels
The total surface installed of solar collectors are to be declared.
The following biofuel production capacities are to be declared:
1 Liquid Biofuels:
1.1 Of which: Biogasoline
1.2 Of which: Biodiesels
1.3 Of which: Other Liquid Biofuels
5.2.6. Inputs to autoproducers of electricity and heat generation
Inputs to autoproducers of electricity and heat generation are to be declared separately for electricity
only plants, for CHP plants, and for heat only plants.
Quantities of energy products that are mentioned in Subtitle 5.1 (except for hydro power, solar
1.4 Of which: Coke Ovens
1.5 Of which: Petroleum Refineries
1.6 Of which: BKB / PB Plants
1.7 Of which: Gas Works Gas
1.8 Of which: Blast Furnaces
1.9 Of which: Charcoal production plants
1.10 Of which: Not Elsewhere Specified
2 Industry Sector
2.1 Of which: Iron and Steel
2.2 Of which: Chemical and Petrochemical
2.3 Of which: Non-Ferrous Metals
2.4 Of which: Non-Metallic Minerals
2.5 Of which: Transport Equipment
2.6 Of which: Machinery
2.7 Of which: Mining and Quarrying
2.8 Of which: Food, Beverages and Tobacco
2.9 Of which: Pulp, Paper and printing
4 Other Sectors
4.1 Of which: Commercial and Public Services
4.2 Of which: Residential
4.3 Of which: Agriculture/Forestry
4.4 Of which: Fishing
4.5 Of which: Not Elsewhere Specified Other
5.3. CALORIFIC VALUES
Average net calorific values are to be declared for the following products:
1 Biogasoline
2 Biodiesel
3 Other liquid biofuels
4 Charcoal
5.4. UNITS OF MEASUREMENT
1 Electricity generation MWh
2 Heat production TJ
3 Renewable energy products Biogasoline, biodiesels and other liquid biofuels: tonnes
5.5. DEROGATIONS AND EXEMPTIONS
Not applicable.
-
6.APPLICABLE PROVISIONS
The following provisions apply for the data collection as described in all preceding chapters:
-
1.Reported period:
A calendar year (January 1st to December 31st).
-
2.Frequency
Annual.
-
3.Deadline for transmission of data
November 30th of the year following the reported period.
-
4.Transmission format and method
The transmission format shall conform to an appropriate interchange standard specified by Eurostat.
Data shall be transmitted or uploaded by electronic means to the single entry point for data at
ANNEX C
MONTHLY ENERGY STATISTICS
This annex describes the scope, units, reported period, frequency, deadline and transmission
modalities for the monthly collection of energy statistics.
Annex A applies for explanations to terms, for which a specific explanation is not supplied in this
annex.
-
1.SOLID FUELS
1.1. APPLICABLE ENERGY PRODUCTS
Unless otherwise specified this data collection applies to all of the following energy products:
Energy Definition
Product
1 Hard coal Black, combustible, solid, organic, fossil sediment with a gross calorific value greater than 24 MJ/kg in ash-free condition with the moisture content obtained at a temperature of 30° C and a relative air humidity of 96 %.
2 Lignite Combustible, brown to black, organic fossil sediment with a gross calorific value lower than 24 MJ/kg in ash-free condition with the moisture content obtained at a temperature of 30° C and a relative air humidity of 96 %.
3 Peat Soft, loose to compressed, natural, combustible sediment of vegetable origin with a high moisture content (up to 90 %), light to dark brown in colour.
This definition is without prejudice to the definition of renewable energy sources as defined in Directive 2001/77/EC and to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories.
4 Patent fuel Patent fuels of hard coal are artefacts of specified shape produced by hot milling under pressure, with the addition of binding material (pitch).
5 Lignite Artefacts of even shape produced after crushing and drying of lignite, moulded under high pressure without the addition of binders. This includes dried lignite and lignite breeze.
briquettes
6 Coke derived Artificial solid fuel derived from hard coal and obtained by dry distillation of the coal in the total or partial absence of air.
from hard coal
Includes:
-
-Hard coke: obtained by carbonization at high temperatures
-
-Semi-coke: obtained by carbonization at low temperatures
-
-Gasworks coke: produced in gasworks.
7 Lignite coke Solid residue obtained by dry distillation of lignite in the absence of air.
1.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
1.2.1. Supply Sector
The following aggregates apply to hard coal, total and black lignite, brown coal and peat:
1 Production
2 Recovered products
Slurries and waste-heap shale recovered by mines.
3 Imports
3.1 Of which: intra-EU imports
4 Exports
4.1 Of which: intra-EU exports
5 Stock changes
Quantities held by mines and importers.
Excludes consumer stocks (e.g. those held in power stations and coking plants) except stocks held by consumers who import directly.
A stock build is shown as a negative number and a stock draw is shown as a positive number.
6 Calculated Inland Deliveries
Total amount of product calculated to have been delivered for inland consumption. It is defined as:
Production + recovered products + Imports Exports + Stock changes
7 Observed Internal Deliveries
7.2 Of which: Main activity power stations
7.3 Of which: Autoproducer power stations in coal mines
7.4 Of which: Coking plants
7.5 Of which: Patent fuel plants
Quantities used for transformation in patent fuels plants (pithead and independent).
7.6 Of which: Total industry (without iron & steel industry)
7.7 Of which: Iron & steel industry
7.8 Of which: Others (services, households, etc.)
Quantities of fuel to households (including colliery coal supplied to workers in mines and associated plants) and services (administrations, shops, etc.) and also to sectors not elsewhere specified (district heating, transport, etc.).
8 Closing stocks
8.1 Of which: Mines
8.2 Of which: Importers
8.3 Of which: at coking plants
Applies to hard coal only.
The following aggregates apply coke derived from hard coal, lignite coke, patent fuels and lignite
briquettes:
5 Calculated Inland Deliveries
Total amount of product calculated to have been delivered for inland consumption. It is defined as:
Production + Imports Exports + Stock changes
6 Observed Internal Deliveries
Quantities delivered to the internal market. Equal to the total of the deliveries to the different types of consumers. A difference may occur between the calculated and observed deliveries.
6.1 Of which: Total industry (without iron & steel industry)
6.2 Of which: Iron & steel industry
6.3 Of which: Others ( services, households, etc.)
Quantities of fuel to households (including coke and patent fuels supplied to workers in mines and associated plants) and services (administrations, shops, etc.)
7 Closing stocks
Stocks are the quantities held:
-
-by coking plants (applicable only to coke of coal and lignite),
-
-patent fuel plants (applicable only to patent fuels of coal and lignite),
-
-importers.
1.2.2. Imports
For lignite, lignite coke, patent fuels and lignite briquettes the total intra-EU and total extra-EU
1.4 Of which: Other EU
The relevant countries must be specified.
2 Extra-EU import quantities
2.1 Of which: USA
2.2 Of which: Australia
2.3 Of which: South Africa
2.4 Of which: C.I.S.
2.4.1 From 2.4, of which: Russia
2.4.2 From 2.4, of which: Ukraine
2.5 Of which: Canada
2.6 Of which: Colombia
2.7 Of which: China
2.8 Of which: Other extra-EU
The relevant countries must be specified.
1.3. UNITS OF MEASUREMENT
All product quantities are expressed in 103 tonnes.
1.4. DEROGATIONS AND EXEMPTIONS
Not applicable.
-
2.ELECTRICITY
2.1. APPLICABLE ENERGY PRODUCTS
2.2. LIST OF AGGREGATES
The following list of aggregates shall be declared.
2.2.1. Production Sector
For the following aggregates both gross and net quantities must be declared:
-
1.Total electricity production
1.1 Of which: Nuclear
1.2 Of which: Hydro
1.2.1 From 1.2, of which: part of hydro produced from pumped storage
1.3 Of which: Geothermal
1.4 Of which: Conventional thermal
1.5 Of which: Wind
Also the following quantities of electrical energy must be declared:
2 Imports
2.1 Of which: intra-EU imports
3 Exports
3.1 Of which: extra-EU exports
For the fuel consumption in main activity producer plants the following aggregates apply (refer to
Annex B for the definitions of hard coal and lignite):
6 Total fuel consumption in main activity producer plants
Total quantity of fuel consumed for the purpose of producing electricity and also for the production of heat to be sold to third parties exclusively.
6.1 Of which: Hard coal
6.2 Of which: Lignite
6.3 Of which: Petroleum products
6.4 Of which: Natural gas
6.5 Of which: Derived gas (these are manufactured gases)
6.6 Of which: Other fuels
2.2.2. Fuel stocks in main activity producers
By main activity producers are meant public utilities generating electricity by using fuels. The
following closing stocks (stocks at the end of the reported month) must be declared:
1 Hard coal
2 Lignite
2.4. DEROGATIONS AND EXEMPTIONS
Not applicable.
-
3.OIL AND PETROLEUM PRODUCTS
3.1. APPLICABLE ENERGY PRODUCTS
Unless otherwise specified this data collection applies to all of the following energy products, for
which the definitions in Annex B Chapter 4 apply : crude oil, NGL, refinery feedstocks, other
hydro-carbons, refinery gas (not liquefied), ethane, LPG, naphtha, motor gasoline, aviation
gasoline, gasoline type jet fuel (naphtha type jet fuel or JP4), kerosene type jet fuel, other kerosene,
gas/diesel oil (distillate fuel oil), transport diesel, heating and other gasoil, fuel oil (both low and
high sulphur content), white spirit and SBP, lubricants, bitumen, paraffin waxes and petroleum
coke.
Where applicable, motor gasoline must be declared in two categories namely:
-
-Unleaded Motor Gasoline: motor gasoline where lead compounds have not been added to
enhance octane rating. It may contain traces of organic lead.
-
-Leaded Motor Gasoline: motor gasoline with TEL and/or TML added to enhance octane
3.2.1. Supply Sector
The following table applies only to crude oil, NGL, refinery feedstocks, additives/ oxygenates,
biofuels and other hydrocarbons only:
-
1.Indigenous Production
Not applicable for refinery feedstocks.
2 From Other Sources
Additives, Biofuels and Other hydrocarbons, the production of which has already been covered in other fuel balances.
Not applicable for crude oil, NGL and refinery feedstocks.
3 Backflows From Petrochemical Sector
Finished or semi-finished products which are returned from final consumers to refineries for processing, blending or sale. They are usually by-products of petrochemical manufacturing.
Only applicable for refinery feedstocks.
4 Products Transferred
Imported petroleum products which are reclassified as feedstocks for further processing in the refinery, without delivery to final consumers.
Only applicable for refinery feedstocks.
5 Imports and exports
Includes quantities of crude oil and products imported or exported under processing agreements (i.e. refining on account). Crude oil and NGLs should be reported as coming from the country of ultimate origin; refinery feedstocks and finished products should be reported as coming from the country of last consignment.
7 Stock changes
A stock build is shown as a positive number and a stock draw is shown as a negative number.
8 Calculated Refinery Intake
Total amount of product calculated to have entered the refinery process. It is defined
as:
Indigenous production + From other sources + Backflows from industry + Products transferred + Imports Exports - Direct use - Stock changes
9 Statistical differences
Defined as the calculated refinery intake minus the observed one.
10 Observed Refinery Intake
Amounts measured as input to refineries
11 Refinery Losses
The difference between Refinery intake (observed) and Gross refinery output. Losses may occur during the distillation processes due to evaporation. Reported losses are positive. There may be volumetric gains but no gains in mass.
12 Production of oxygenates
That part of production or from other sources which is ethers such as MTBE (methyl tertiary butyl ether), TAME (tertiary amyl methyl ether), alcohols such as ethanol and esters and which are used for blending into gasoline and gasoil.
2 Gross Refinery Output
Production of finished products at a refinery or blending plant.
Excludes refinery losses, but includes Refinery fuel.
3 Recycled Products
Finished products which pass a second time through the marketing network, after having been once delivered to final consumers (e.g. used lubricants which are reprocessed). These quantities should be distinguished from petrochemical Backflows.
4 Refinery Fuel
Petroleum products consumed in support of the operation of a refinery.
Excludes products used by oil companies outside the refining process, e.g. bunkers or
oil tankers.
Includes fuels used for the production at the refineries of electricity and heat sold.
5 Imports and Exports
6 International Marine Bunkers
7 Interproduct Transfers
Quantities reclassified either because their specification has changed or because they are blended into another product.
A negative entry for one product is compensated by a positive entry (or several entries) for one or several products and vice versa; the total net effect should be zero.
11 Statistical Difference
Defined as the calculated gross inland delivery minus the observed one.
12 Observed Gross Inland Deliveries
The observed delivery of finished petroleum products from primary sources (e.g. refineries, blending plants, etc.) to the inland market.
This figure may differ from the calculated figure due, for example, to differences in coverage and/or differences of definition in different reporting systems.
12.1 Of which: Deliveries to International Civil Aviation
12.2 Of which: Deliveries to Public Power Plants
12.3 Of which: Deliveries of Automotive LPG
12.4 Of which: Deliveries (gross) to Petrochemical sector
13 Backflows from Petrochemical sector to refineries
14 Total net inland deliveries
3.2.2. Stocks
The following opening and closing stocks must be declared for all energy products except for
refinery gas:
1 Stocks on national territory
3 Stocks with known foreign destination
Stocks not included in point 2 on national territory which belong to and are destined for another country. These stocks may be located inside or outside bonded areas.
4 Other stocks held in bonded areas
Includes stocks not included in point 2 nor 3 irrespective of whether they have received customs clearance or not.
5 Stocks held by major consumers
Include stocks which are subject to government control. This definition does not include other consumer stocks.
6 Stocks held on board incoming ocean vessels in port or at mooring
Stocks irrespective of whether they have been cleared by customs or not. This category excludes stocks on board vessels at high seas.
Includes oil in coastal tankers if both their port of departure and destination are in the same country. In the case of incoming vessels with more than one port of unloading, only report the amount to be unloaded in your country.
7 Stocks held by government on national territory
Includes non-military stocks held within the national territory by government, which are government owned or controlled and held exclusively for emergency purposes.
Excludes stocks held by state oil companies or electric utilities or stocks held directly by oil companies on behalf of governments.
8 Stocks held by stock holding organisation on national territory
Stocks held by both public and private corporations established to maintain stocks exclusively for emergency purposes.
10.1 Of which: Government stocks
10.2 Of which: Holding organisation's stocks
10.3 Of which: Other stocks
11 Stocks held abroad designated definitely for import stocks
Stocks not included in category 10 which belonging to the reporting state but which are held in another state and awaiting import there.
12 Other stocks in bonded areas
Other stocks in the national territory not included in the above categories.
13 Pipeline fill
Oil (crude oil and petroleum products) contained in pipelines, necessary to maintain the flow in the pipelines.
In addition, a breakdown of quantities per corresponding country must be declared for:
-
closing stocks held for other countries under bilateral government agreements,
-
-other closing stocks with known foreign destination,
-
-closing stocks held abroad under bilateral government agreements
-
-other closing stocks held abroad designated definitely for import into your country.
By opening stocks are meant the stocks on the last day of the month preceding the reported one. By
3.4. GEOGRAPHICAL NOTES
For statistical reporting purposes only, the clarifications of Annexe A Chapter 1 apply with the
following specific exceptions:
(1) Denmark includes the Danish Faroes and Greenland.
(2) Switzerland includes Liechtenstein.
3.5. DEROGATIONS AND EXEMPTIONS
Not applicable.
-
4.NATURAL GAS
4.1. APPLICABLE ENERGY PRODUCTS
Natural gas is defined in Annex B Chapter 2.
4.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
4.2.1. Supply Sector
-
1.Indigenous Production
All dry marketable production within national boundaries, including offshore production. Production is measured after purification and extraction of NGLs and sulphur.
4 Stock changes
A stock build is shown as a positive number and a stock draw is shown as a negative number.
5 Calculated Gross Inland Deliveries
This is defined as:
Indigenous Production + Imports Exports - Stock Change
6 Statistical Difference
Defined as the calculated gross inland delivery minus the observed one.
7 Observed Gross Inland Deliveries
Includes gas used by the gas industry for heating and operation of their equipment (i.e. consumption in gas extraction, in the pipeline system and in processing plants) and losses in distribution.
8 Opening and closing levels of stocks held on national territory
Quantities stored in special storage facilities (depleted gas and/or oil field, aquifer, salt cavity, mixed caverns or other) as well as liquefied natural gas storage. By opening stocks are meant the stocks on the last day of the month preceding the reported one. By closing stocks are meant the stocks on the last day of the reported month.
9 Own use and losses of the natural gas industry
Own used quantities by the gas industry for heating and operation of its equipment (i.e. consumption in gas extraction, in the pipeline system and in processing plants).
Includes losses in distribution.
4.4. DEROGATIONS AND EXEMPTIONS
Not applicable.
-
5.APPLICABLE PROVISIONS
The following provisions apply for the data collection as described in all preceding chapters:
-
1.Reported period:
A calendar month.
-
2.Frequency
Monthly.
-
3.Deadline for transmission of data
Within three months following the reported month.
-
4.Transmission format and method
The transmission format shall conform to an appropriate interchange standard specified by Eurostat.
Data shall be transmitted or uploaded by electronic means to the single entry point for data at
ANNEX D
SHORT TERM MONTHLY STATISTICS
This annex describes the scope, units, reported period, frequency, deadline and transmission
modalities for the short-term monthly collection of statistical data.
Annex A applies for explanations to terms, for which a specific explanation is not supplied in this
annex.
-
1.NATURAL GAS
1.1. APPLICABLE ENERGY PRODUCTS
This chapter covers natural gas only. Natural gas is defined in chapter 2 of Annex B.
1.2. LIST OF AGGREGATES
The following list of aggregates shall be declared.
-
1.Production
2 Imports
3 Exports
4 Stock change
A stock build is shown as a negative number and a stock draw is shown as a positive number.
1.4. OTHER APPLICABLE PROVISIONS
-
1.Reported period:
A calendar month.
-
2.Frequency
Monthly.
-
3.Deadline for transmission of data
Within one month following the reported month.
-
4.Transmission format and method
The transmission format shall conform to an appropriate interchange standard specified by Eurostat.
Data shall be transmitted or uploaded by electronic means to the single entry point for data at
Eurostat.
1.5. DEROGATIONS AND EXEMPTIONS
Germany is exempted from this data collection.
-
2.ELECTRICITY
2.1. APPLICABLE ENERGY PRODUCTS
3 Exports
4 Gross electricity Supply
This is calculated as:
Total electricity production + imports exports
2.3. UNITS OF MEASUREMENT
Energy quantities must be expressed in GWh
2.4. OTHER APPLICABLE PROVISIONS
-
1.Reported period:
A calendar month.
-
2.Frequency
Monthly.
-
3.Deadline for transmission of data
Within one month following the reported month.
-
4.Transmission format and method
The transmission format shall conform to an appropriate interchange standard specified by Eurostat.
Data shall be transmitted or uploaded by electronic means to the single entry point for data at
3.1. APPLICABLE ENERGY PRODUCTS
Unless otherwise specified this data collection applies to all of the following energy products, for
which the definitions in Chapter 4 of Annex B apply : crude oil, LPG, gasoline (which is the sum of
motor gasoline and aviation gasoline), kerosene (which is the sum of kerosene type jet fuel and
other kerosene), gas/diesel oil and fuel oil (both low and high sulphur content).
In addition, this data collection also applies to "total oil", by which is meant the sum of all these
products except crude oil, and must also include other petroleum products such as refinery gas,
ethane, naphtha, petroleum coke, white spirit and SBP, paraffin waxes, bitumen, lubricants and
others.
3.2. LIST OF AGGREGATES
The following list of aggregates shall be declared for all energy products listed in the previous
paragraph unless otherwise specified.
3.2.1. Supply Sector
The following table applies only to crude oil:
1 Production
2 Imports
The following table applies to crude oil, LPG, gasoline, kerosene, gas/diesel oil, fuel oil and total
oil:
1 Refinery Output
Gross output, including refinery fuel.
2 Imports
3 Exports
4 Closing Stock
5 Stock change
A stock build is shown as a positive number and a stock draw is shown as a negative number.
6 Demand
Deliveries or sales to the inland market (domestic consumption) plus Refinery Fuel plus International Marine and Aviation Bunkers. Demand for Total Oil includes Crude.
3.3. UNITS OF MEASUREMENT
Energy quantities: 103 tonnes
3.4. OTHER APPLICABLE PROVISIONS
-
1.Reported period:
A calendar month.
-
2.Frequency
Monthly.
-
3.Deadline for transmission of data
Within 25 days following the reported month.
-
4.Transmission format and method
The transmission format shall conform to an appropriate interchange standard specified by Eurostat.
Data shall be transmitted or uploaded by electronic means to the single entry point for data at
Eurostat.
3.4. DEROGATIONS AND EXEMPTIONS
Not applicable.
__________________
| publication date | 13-02-2008 |
|---|---|
| reference | 5243/08 |
